Andrew ATM200-A20 - Andrew - Launch 3 Direct
Andrew ATM200-A20 - Andrew - Launch 3 Direct

Andrew ATM200-A20

RET Motors for VTM Antenna, Teletilt Actuator, AISG 2.0 default protocol.The ATM200-A20 is shipped in AISG 2.0 mode. In the field, the actuator can be set to AISG 1.1 or 2.0 as needed. The actuator's absolute position sensor eliminates the need for calibration, enhances precision and prevents dropped calls caused by calibration sweeps. Male and female AISG connectors facilitate daisy chaining actuators. As many as 32 actuators can be attached to a single control line. This actuator is equipped with a flashing LED, which indicates data transfer and tilt movements. It comes in a weather resistant gasket-sealed container that has a drain hole to permit drainage of condensed moisture. The ATM200-A20 actuator can be field fitted onto Andrew Teletilt remote electrical downtilt (RET) compatible antennas that are already in service or factory fitted before delivery to the field. The part number for antennas with a factory-fit ATM200-A20 actuator ends in -AxM, with x referring to the number of the attached actuators (either A1M or A2M). Allows remote electrical tilt (RET) Conforms with AISG 1.1 and 2.0 Ships in AISG 2.0 mode

Teletilt® Actuator, AISG 2.0 default protocol

Connects to the base station antenna for remote electrical tilt
Factory set to AISG 2.0 mode
Can be field reset to AISG 1.1
Absolute position sensor eliminates the need for calibration
LED indicates tilt movement
RET Motors for VTM Antenna, Teletilt Actuator, AISG 2.0 default protocol.The ATM200-A20 is shipped in AISG 2.0 mode. In the field, the actuator can be set to AISG 1.1 or 2.0 as needed. The actuator's absolute position sensor eliminates the need for calibration, enhances precision and prevents dropped calls caused by calibration sweeps. Male and female AISG connectors facilitate daisy chaining actuators. As many as 32 actuators can be attached to a single control line. This actuator is equipped with a flashing LED, which indicates data transfer and tilt movements. It comes in a weather resistant gasket-sealed container that has a drain hole to permit drainage of condensed moisture. The ATM200-A20 actuator can be field fitted onto Andrew Teletilt remote electrical downtilt (RET) compatible antennas that are already in service or factory fitted before delivery to the field. The part number for antennas with a factory-fit ATM200-A20 actuator ends in -AxM, with x referring to the number of the attached actuators (either A1M or A2M). Allows remote electrical tilt (RET) Conforms with AISG 1.1 and 2.0 Ships in AISG 2.0 mode

Teletilt® Actuator, AISG 2.0 default protocol

Connects to the base station antenna for remote electrical tilt
Factory set to AISG 2.0 mode
Can be field reset to AISG 1.1
Absolute position sensor eliminates the need for calibration
LED indicates tilt movement