DualPol Dual Band Antenna, 824-896 MHz and 1850-2180 MHz, 90 degree horizontal beam width, RET compatible variable electrical tilt

Model with Factory Installed AISG 1.1 Actuator (Missing DB5083 Mounting Bracket)016038-003 M. KIT This model is the same as the DBXLH-9090A-VTM but this Model comes with Factory Installed AISG 1.1 Actuator

 

Specifications

• Download

 

Electrical Specifications

Frequency Band, MHz	824–896	1850–1990	1920–2180
Gain, dBi	13.3	16.2	16.2
Beamwidth, Horizontal, degrees	87	90	90
Beamwidth, Vertical, degrees	16.0	6.8	6.5
Beam Tilt, degrees	0–16	0–8	0–8
USLS, typical, dB	15	15	15
Front-to-Back Ratio at 180°, dB	26	30	30
Isolation, dB	28	30	30
VSWR | Return Loss, dB	1.4 | 15.6	1.5 | 14.0	1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc	-150	-150	-150
Input Power per Port, maximum, watts	300	250	250
Polarization	±45°	±45°	±45°
Impedance	50 ohm	50 ohm	50 ohm

General Specifications
Antenna Brand	Andrew®
Antenna Type	DualPol® multiband
Band	Multiband
Brand	DualPol®   |   Teletilt®
Operating Frequency Band	1850 – 2180 MHz   |   824 – 896 MHz
Performance Note	Outdoor usage
Mechanical Specifications
Color	Light gray
Lightning Protection	dc Ground
Radiator Material	Brass   |   Low loss circuit board
Radome Material	UV protected radome
RF Connector Interface	7-16 DIN Female
RF Connector Location	Bottom
RF Connector Quantity, total	4
Wind Area, maximum	0.2 m²   |   2.6 ft²
Wind Loading, maximum	653.9 N @ 100 mph 147.0 lbf @ 100 mph
Wind Speed, maximum	241 km/h   |   150 mph
Dimensions
Depth	127.0 mm   |   5.0 in
Length	1305.6 mm   |   51.4 in
Width	391.2 mm   |   15.4 in
Net Weight	12.7 kg   |   28.0 lb
Remote Electrical Tilt (RET) Information
Model with Factory Installed AISG 1.1 Actuator	DBXLH-9090A-R2M
RET System	Teletilt