877-878-9134 
sales@launch3.net
Andrew HBX-4519DS-VTM
Wireless
DualPol Antenna, 1710–2170 MHz, 45 horizontal beamwidth, RET compatible variable electrical tilt Andrew Antenna, 1710–2180 MHz, 45° horizontal beamwidth, RET compatible Ideal for high gain corridor coverage or capacity optimization Rugged, reliable design with excellent passive intermodulation suppression
Specifications
| Electrical Specifications |
| Frequency Band, MHz | 1710–1880 | 1850–1990 | 1920–2180 |
|---|---|---|---|
| Gain, dBi | 20.1 | 20.4 | 20.8 |
| Beamwidth, Horizontal, degrees | 46 | 47 | 44 |
| Beamwidth, Vertical, degrees | 4.9 | 4.7 | 4.5 |
| Beam Tilt, degrees | 0–5 | 0–5 | 0–5 |
| USLS (First Lobe), dB | 22 | 22 | 20 |
| Front-to-Back Ratio at 180°, dB | 33 | 35 | 35 |
| Isolation, dB | 30 | 30 | 30 |
| VSWR | Return Loss, dB | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 |
| PIM, 3rd Order, 2 x 20 W, dBc | -153 | -153 | -153 |
| Input Power per Port, maximum, watts | 350 | 350 | 350 |
| Polarization | ±45° | ±45° | ±45° |
| Impedance | 50 ohm | 50 ohm | 50 ohm |
| Electrical Specifications, BASTA* |
| Frequency Band, MHz | 1710–1880 | 1850–1990 | 1920–2180 | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Gain by all Beam Tilts, average, dBi | 19.9 | 20.1 | 20.5 | |||||||||
| Gain by all Beam Tilts Tolerance, dB | ±0.3 | ±0.4 | ±0.5 | |||||||||
| Gain by Beam Tilt, average, dBi |
|
|
|
|||||||||
| Beamwidth, Horizontal Tolerance, degrees | ±1.4 | ±0.9 | ±5.4 | |||||||||
| Beamwidth, Vertical Tolerance, degrees | ±0.3 | ±0.2 | ±0.3 | |||||||||
| USLS, beampeak to 20° above beampeak, dB | 17 | 16 | 14 | |||||||||
| Front-to-Back Total Power at 180° ± 30°, dB | 28 | 30 | 30 | |||||||||
| CPR at Boresight, dB | 21 | 24 | 22 | |||||||||
| CPR at Sector, dB | 14 | 16 | 12 |
- * CommScope® supports NGMN recommendations on Base Station Antenna Standards (BASTA). To learn more about the benefits of BASTA, download the whitepaper Time to Raise the Bar on BSAs.
| General Specifications | |
| Antenna Brand | Andrew® |
| Antenna Type | DualPol® |
| Band | Single band |
| Brand | DualPol® |
| Operating Frequency Band | 1710 – 2180 MHz |
Performance Note 
|
Outdoor usage |
| |
|
| Mechanical Specifications | |
| Color | Light gray |
| Lightning Protection | dc Ground |
| Radiator Material | Low loss circuit board |
| Radome Material | PVC, UV resistant |
| Reflector Material | Aluminum |
| RF Connector Interface | 7-16 DIN Female |
| RF Connector Location | Bottom |
| RF Connector Quantity, total | 2 |
| Wind Loading, frontal | 659.0 N @ 150 km/h 148.1 lbf @ 150 km/h |
| Wind Loading, lateral | 143.0 N @ 150 km/h 32.1 lbf @ 150 km/h |
| Wind Loading, rear | 717.0 N @ 150 km/h 161.2 lbf @ 150 km/h |
| Wind Speed, maximum | 201 km/h | 125 mph |
| |
|
| Dimensions | |
| Depth | 132.0 mm | 5.2 in |
| Length | 1938.0 mm | 76.3 in |
| Width | 269.0 mm | 10.6 in |
| Net Weight, without mounting kit | 16.3 kg | 35.9 lb |
| |
|
| Remote Electrical Tilt (RET) Information | |
| Model with Factory Installed AISG 2.0 Actuator | HBX-4519DS-A1M |
| |
|
| Packed Dimensions | |
| Depth | 267.0 mm | 10.5 in |
| Length | 2251.0 mm | 88.6 in |
| Width | 376.0 mm | 14.8 in |
| Shipping Weight | 27.4 kg | 60.4 lb |
SHARE:
DualPol Antenna, 1710–2170 MHz, 45 horizontal beamwidth, RET compatible variable electrical tilt Andrew Antenna, 1710–2180 MHz, 45° horizontal beamwidth, RET compatible Ideal for high gain corridor coverage or capacity optimization Rugged, reliable design with excellent passive intermodulation suppression
Specifications
| Electrical Specifications |
| Frequency Band, MHz | 1710–1880 | 1850–1990 | 1920–2180 |
|---|---|---|---|
| Gain, dBi | 20.1 | 20.4 | 20.8 |
| Beamwidth, Horizontal, degrees | 46 | 47 | 44 |
| Beamwidth, Vertical, degrees | 4.9 | 4.7 | 4.5 |
| Beam Tilt, degrees | 0–5 | 0–5 | 0–5 |
| USLS (First Lobe), dB | 22 | 22 | 20 |
| Front-to-Back Ratio at 180°, dB | 33 | 35 | 35 |
| Isolation, dB | 30 | 30 | 30 |
| VSWR | Return Loss, dB | 1.5 | 14.0 | 1.5 | 14.0 | 1.5 | 14.0 |
| PIM, 3rd Order, 2 x 20 W, dBc | -153 | -153 | -153 |
| Input Power per Port, maximum, watts | 350 | 350 | 350 |
| Polarization | ±45° | ±45° | ±45° |
| Impedance | 50 ohm | 50 ohm | 50 ohm |
| Electrical Specifications, BASTA* |
| Frequency Band, MHz | 1710–1880 | 1850–1990 | 1920–2180 | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Gain by all Beam Tilts, average, dBi | 19.9 | 20.1 | 20.5 | |||||||||
| Gain by all Beam Tilts Tolerance, dB | ±0.3 | ±0.4 | ±0.5 | |||||||||
| Gain by Beam Tilt, average, dBi |
|
|
|
|||||||||
| Beamwidth, Horizontal Tolerance, degrees | ±1.4 | ±0.9 | ±5.4 | |||||||||
| Beamwidth, Vertical Tolerance, degrees | ±0.3 | ±0.2 | ±0.3 | |||||||||
| USLS, beampeak to 20° above beampeak, dB | 17 | 16 | 14 | |||||||||
| Front-to-Back Total Power at 180° ± 30°, dB | 28 | 30 | 30 | |||||||||
| CPR at Boresight, dB | 21 | 24 | 22 | |||||||||
| CPR at Sector, dB | 14 | 16 | 12 |
- * CommScope® supports NGMN recommendations on Base Station Antenna Standards (BASTA). To learn more about the benefits of BASTA, download the whitepaper Time to Raise the Bar on BSAs.
| General Specifications | |
| Antenna Brand | Andrew® |
| Antenna Type | DualPol® |
| Band | Single band |
| Brand | DualPol® |
| Operating Frequency Band | 1710 – 2180 MHz |
| Performance Note
|
Outdoor usage |
| |
|
| Mechanical Specifications | |
| Color | Light gray |
| Lightning Protection | dc Ground |
| Radiator Material | Low loss circuit board |
| Radome Material | PVC, UV resistant |
| Reflector Material | Aluminum |
| RF Connector Interface | 7-16 DIN Female |
| RF Connector Location | Bottom |
| RF Connector Quantity, total | 2 |
| Wind Loading, frontal | 659.0 N @ 150 km/h 148.1 lbf @ 150 km/h |
| Wind Loading, lateral | 143.0 N @ 150 km/h 32.1 lbf @ 150 km/h |
| Wind Loading, rear | 717.0 N @ 150 km/h 161.2 lbf @ 150 km/h |
| Wind Speed, maximum | 201 km/h | 125 mph |
| |
|
| Dimensions | |
| Depth | 132.0 mm | 5.2 in |
| Length | 1938.0 mm | 76.3 in |
| Width | 269.0 mm | 10.6 in |
| Net Weight, without mounting kit | 16.3 kg | 35.9 lb |
| |
|
| Remote Electrical Tilt (RET) Information | |
| Model with Factory Installed AISG 2.0 Actuator | HBX-4519DS-A1M |
| |
|
| Packed Dimensions | |
| Depth | 267.0 mm | 10.5 in |
| Length | 2251.0 mm | 88.6 in |
| Width | 376.0 mm | 14.8 in |
| Shipping Weight | 27.4 kg | 60.4 lb |
Returns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the 'Complete Orders' link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
We accept payments via Visa, Mastercard, American Express and Paypal. Net Terms for purchase orders are subject to approval. Launch 3 Telecom has a Government Cage Code, so please inform us of government purchases.
You can reach us at 877-878-9134 or at sales@launch3.net for access to our credit card form.
Our products are packed in anti-static bags & bubble wrap to ensure safe delivery.
We combine multiple items into one shipment whenever possible to save on shipping time and costs. Orders may arrive in multiple shipments, at no extra cost to you, due to our numerous distribution points and vendor locations.
Please contact us at 877- 878-9134 or email us at sales@launch3.net if you have any unique shipment requests. We will do our best to accommodate your needs.
We stand by our products and are committed to your satisfaction.
If questions or concerns arise, contact our Customer Service Department at 877-878-9134, Monday - Friday, 9 AM - 5 PM EST. Friendly customer service representatives are available to assist you.
Related Products
$ 15.55
$ 17.00
$ 150.00
$ 3.50
$ 16.00