Concealfab: PIM Shield PIM Mitigation Paint, 1 Quart

PIM Shield PIM mitigation paint is a conductive acrylic polymer with enhanced elasticity designed to reduce external passive intermodulation (PIM) at cellular base stations. PIM Shield paint is intended for large, flat surfaces and should NOT be applied directly to antenna mounting structures. Use PIM Seal Conductive Caulk to reduce PIM at metal-to-metal contacts on antenna mounting structures. 

• Low PIM
• High RF Attenuation
• Crack Resistant
• UV stable Acrylic
• Water based
• Non-flammable
• Intended use Interior or Exterior use. Not intended for walking surfaces.
• Color: Dark Gray
• Gloss: Flat / matte
• Sheen: <10
• Tinting: No
• Topcoat: Two coats of Exterior Acrylic Latex paint recommended. Verify compatibility of topcoat on small test area before application. Allow PIM Paint to cure a minimum of 24 hrs. before applying topcoat.
• Resin type: Acrylic
• Drying time: 8 hr.
• Dry to touch 2 hr.
• Full cure: 7 days
• Drying time: (between coats) 4 hr.
• Recommended wet film thickness per coat" 0.01 inch (10 mils) Two coats recommended
• Radiated PIM performance, IEC 62037-8, near field test, static, 700 MHz, 1900 MHz: IM3 <-100 dBm with 2x 20W test tones
• 1 Quart